Honda 2004 Odyssey, Service Manual

Page: 716 / 2459

−
−
−
−
−
−
−
０１
０２
０３
Ｓ０Ｘ４ＡＡ３Ｋ７７１０００９０７５８ＦＡＡＴ００
2001 Model
DTC P0758:
YES
NO
YES
NO
YES
NO
14-103
LG1 (BRN/BLK)
LG2 (BRN/BLK)
A (31P)
C (22P)
PCM CONNECTORS
SH B (GRN/WHT)
LG1 (BRN/BLK)
LG2 (BRN/BLK)
A (31P)
C (22P)
PCM CONNECTORS
SH B (GRN/WHT)
LG1 (BRN/BLK)
LG2 (BRN/BLK)
PCM CONNECTOR A (31P)
Problem in Shift Solenoid Valve
B Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-3) before
you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Turn the ignition switch OFF.
2. Disconnect PCM connectors A (31P) and C (22P).
3. Turn the ignition switch ON (II).
4. Measure the voltage between PCM connector
terminals C9 and A25 or A26.
Repair short to power in the wire between
PCM connector terminal C9 and the shift solenoid
valve B.
Go to step 5.
5. Turn the ignition switch OFF.
6. Measure the resistance between PCM connector
terminals C9 and A25 or A26.
Go to step 11.
Go to step 7.
7. Check for continuity between PCM connector
terminal A25 and body ground, and between
terminal A26 and body ground.
Go to step 8.
Repair open in the wires between PCM
connector terminals A25 and A26, and ground
(G101), or repair poor ground (G101).
(cont’d)
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e voltage?
Is the r esistance 12 25 ?
Is ther e continuity?
03/07/29 09:32:21 61S0X050_140_0106