Honda 2004 Odyssey, Service Manual

Page: 1383 / 2459

０１
Ｓ０Ｘ４Ａ００Ｊ１６１７０９２１１０１ＫＢＡＴ０１
０１
Ｓ０Ｘ４Ａ００Ｊ１６１７０９５５６５８ＫＢＡＴ０２
Manual Sliding Door
20-18 20-18
Doors
Sliding Door Lower Roller Latch
Replacement Sliding Door Hook Pin and Male
Stop Replacement
Fastener Locations
: Nut, 2
8 x 1.25 mm
22 N·m
(2.2 kgf·m,
16 lbf·ft)
C A B
B
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
D
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
A
C
1. Remove the nuts, then loosen the cable adjusting
nuts (A) and disconnect the lower roller latch cable
(B) from the lower roller latch (C). Take care not to
bend the cable.
2. Install the lower roller latch in the reverse order of
removal, and note these items:
• Make sure the lower roller latch cable is
connected properly.
• Make sure the door locks and opens properly. If
necessary, adjust the lower roller lever cable
adjusting nuts.
1. Remove the hook cover (A), then remove the
sliding door hook pin (B) using a Torx T50 bit.
2. Remove the male stop cover (C), then remove the
sliding door male stop (D).
3. Install the hook pin and male stop in the reverse
order of removal. Apply thread liquid lock to the
sliding door hook pin and male stop before
reinstallation.
03/07/29 10:00:08 61S0X050_200_0020