Honda 2004 Odyssey, Service Manual

Page: 1375 / 2459

＊０２
０１
Ｓ０Ｘ４Ａ００Ｊ１６１２６７２０８０１ＫＢＡＴ００
20-10 20-10
Doors
Front Door Outer Handle
Replacement (cont’d) Front Door Latch Replacement
F A
C
E
D
B
G
Fastener Location
: Screw, 1
A
B
A
8. Pull the outer handle (A) away from the door. Use
diagonal cutters (B) to pry the joint (C) out of the
arm on the outer handle, and then remove the
outer handle rod (D) from the joint.
NOTE:
• To ease reassembly, note the distance (E) of the
outer handle rod on the joint before
disconnecting it.
• Take care not to bend the outer handle rod.
• Use a shop towel (F) to protect the opening in the
door.
9. Replace the bushing (G) on the outer handle.
10. Install the outer handle in the reverse order of
removal, and note these items:
• Make sure the cylinder switch harness is routed
properly.
• Make sure the connector is plugged in properly,
and each rod is connected securely.
• Make sure the door locks and opens properly.
• When installing the lock cylinder, leave the outer
door handle bolts loose so the inner protector
does not interfere with the lock cylinder
installation, then tighten the handle bolts.
• Install the lock cylinder retaining clip on the
handle, then install the lock cylinder. Be sure the
clip is fully seated in the slot on the lock cylinder.
• When reinstalling the door panel, make sure the
plastic cover is installed properly and sealed
around its perimeter.
• For ’03-04 models: Reset the power window
control unit (see page 22-200).
NOTE: Put on gloves to protect your hands.
1. Raise the glass fully.
2. Remove these items:
• Door panel (see page 20-7)
• Plastic cover, as necessary (see page 20-2)
• Outer handle (see page 20-8)
3. Remove the screw and detach the hooks (A), then
remove the lock rod protector (B).
03/07/29 10:00:02 61S0X050_200_0012