Honda 2004 Odyssey, Service Manual

Page: 1332 / 2459

−
−
−
−
−
−
−
−
−
−
＊０２
０２
１１
Ｓ０Ｘ４Ａ０６Ｋ７０２０００８１２８０ＦＡＡＴ１０
＋
TCS DTC Appropriate Terminal
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
TCS DTC 28:
19-131 19-131
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
ABS/TCS CONTROL UNIT CONNECTOR C (12P)
TCS RELAY CONNECTOR
B (BLU/BLK)
NCR
(GRY) NOR
(LT BLU)
NOL
(RED/GRN) NCL
(YEL/GRN)
(YEL/WHT)
FL-OUT
(YEL/GRN) (YEL/BLK)
(RED/BLU) (RED/GRN) (RED/BLK) (RED/WHT)
(YEL/BLU)
RR-OUT RL-OUT FR-OUT
RR-IN FL-IN
RL-IN FR-IN
18. Connect the modulator unit connector.
19. Check for continuity between the appropriate ABS/
TCS control unit connector A (26P) terminal and all
other ABS and TCS solenoid circuit terminals (see
table).
24: NOR No. 16
25: NCR No. 15
26: NOL No. 3
27: NCL No. 2
Replace the modulator unit.
Check for loose ABS/TCS control unit
connectors. If necessary, substitute a known-good
ABS/TCS control unit, and recheck.
1. Check the TCS (10A) fuse in the passenger’s under-
dash fuse/relay box, and reinstall the fuse if it is OK.
Go to step 2.
Replace the fuse, and recheck.
2. Turn the ignition switch ON (II).
Repair short to body ground in the wire
between the TCS relay and modulator unit.
Go to step 3.
3. Check the TCS relay in the under-hood multi-fuse/
relay box (see page 22-88). The wire colors of the
TCS relay connector are BLU/BLK, RED/BLU, BRN/
BLK, and GRN/YEL.
Do not reinstall the TCS relay, and go to step
4.
Replace the TCS relay.
4. Measure the voltage between the TCS relay
connector terminal No. 1 and body ground.
Go to step 5.
Repair open in the wire between the under-
hood fuse/relay box and the TCS relay.
(cont’d)
TCS Relay
Wire side of female terminals
Wire side of female terminals
Terminal side of female terminals
Is ther e less than 3 ?
Is the f use OK ?
Does the f use blow?
Is the r elay OK ?
Is ther e batter y voltage?
03/07/29 09:57:46 61S0X050_190_0131