Honda 2004 Odyssey, Service Manual

Page: 2364 / 2459

−
−
０３
０４
０５
＊０１
YES
NO
23-299
A
B
SRS UNIT CONNECTOR B (28P)
GRN/RED
GRN/YEL
C852
A
10. Disconnect both seat belt tensioner 2P connectors
from the side wire harness 2P connectors (A).
11. Disconnect SRS unit connector B (28P) from the
SRS unit.
12. Check resistance between the No. 16 terminal of
SRS unit connector B (28P) and body ground, and
the No. 28 terminal and body ground. There should
an open circuit, or at least 1 M
.
Faulty SRS unit, or poor contact at SRS unit
connector B (28P) and the SRS unit. Check the
connection; if the connection is OK, replace the
SRS unit (see page 23-384).
Go to step 13.
13. Disconnect SRS floor subharness 28P connector (A)
from the SRS floor harness connector C852.
(cont’d)
Wire side of female terminals
Is the r esistance as specif ied?
03/07/29 10:39:57 61S0X050_230_0299