Honda 2004 Odyssey, Service Manual

Page: 487 / 2459

＊０２
11-178
PGM-FI System
Injector Replacement (cont’d)
C
A
B
E
D
8. Slide new cushion rings (A) onto the fuel injectors (B).
9. Coat the new O-rings (C) with clean engine oil, and put them on the injectors.
10. Insert the injectors into the fuel rail (D).
11. Coat new seal rings (E) with clean engine oil, and press them into the intake manifold.
12. Install the fuel rail in the intake manifold.
13. Install and tighten the bolts.
14. Connect the vacuum hose and fuel return hose to the fuel pressure regulator.
15. Install the connectors on the injectors.
16. Install the intake manifold and the intake manifold cover (see page 9-7).
17. Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs for about 2 seconds, the
fuel pressure in the fuel line rises. Repeat this two or three times, then check for fuel leakage.
03/07/29 09:23:01 61S0X050_110_0178