Honda 2004 Odyssey, Service Manual

Page: 2156 / 2459

−
−
−
０３
０３
０５
YES
NO
23-91
A
B
C
A
SRS MAIN HARNESS 18P CONNECTOR
15. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
16. Disconnect the driver’s airbag connector (A), front
passenger’s airbag connector (B), and driver’s seat
belt tensioner connector (C).
17. Disconnect the SRS main harness 18P connector
(A) from the SRS unit. Do not disconnect the special
tool from the right side wire harness 2P connector.
18. Check resistance between the No. 5 terminal and
the No. 12 terminal of the SRS main harness 18P
connector. There should be 2.0
3.0 .
Faulty SRS unit or poor contact at the SRS
main harness 18P connector and the SRS unit.
Check the connection; if the connection is OK,
replace the SRS unit (see page 23-382).
Open or increased resistance in the SRS main
harness; replace the SRS main harness.
Wire side of female terminals
Is the r esistance as specif ied?
03/07/29 10:33:11 61S0X050_230_0091