Honda 2004 Odyssey, Service Manual

Page: 1071 / 2459

＊０１
＊０２
＊０３
Ｓ０Ｘ４ＡＡ１Ｅ１０４１１３１００１１ＬＤＡＴ００
Special Tools Required
14-458
Shafts and Clutches
Clutch Reassembly
A
B
A
A
B
A
B
A
B
• Clutch spring compressor attachment
07LAE-PX40100
• Clutch spring compressor attachment
07HAE-PL50101
• Clutch spring compressor bolt assembly
07GAE-PG40200 or 07GAE-PG4020A
• Clutch compressor attachment
07ZAE-PRP0100
Note these items during reassembly:
• Clean all parts thoroughly in solvent or carburetor
cleaner, and dry them with compressed air.
• Blow out all passages.
• Apply ATF to all parts before assembly.
1. Soak the clutch discs thoroughly in ATF for a
minimum of 30 minutes.
2. Inspect the check valve (A) on the clutch pistons (B)
except 1st-hold clutch; if it’s loose or stuck, replace
the piston.
3. Install new O-rings (A) on the piston (B).
4. Install the piston (A) in the clutch drum (B). Apply
pressure and rotate to ensure proper seating.
Lubricate the piston O-ring with ATF before
installing. Do not pinch the O-ring by installing the
piston with too much force.
03/07/29 09:46:09 61S0X050_140_0461