Honda 2004 Odyssey, Service Manual

Page: 690 / 2459

−
−
−
−
−
−
−
０１
０２
＊０１
Ｓ０Ｘ４ＡＡ２Ｋ７７１０００９０７５８ＦＡＡＴ００
1999-2000 Models
DTC P0758:
YES
NO
YES
NO
YES
NO
14-77
PCM CONNECTORS
B (25P)
LG1 (BRN/BLK) LG2 (BRN/BLK)
D (16P)
SH B (GRN/WHT)
PCM CONNECTORS
B (25P)
LG1 (BRN/BLK)
LG2 (BRN/BLK)
D (16P)
SH B (GRN/WHT)
PCM CONNECTOR B (25P)
LG1 (BRN/BLK) LG2 (BRN/BLK)
Problem in Shift Control Solenoid
Valve B Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-3) before
you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Turn the ignition switch OFF.
2. Disconnect the B (25P) and D (16P) connectors from
the PCM.
3. Turn the ignition switch ON (II).
4. Measure the voltage between the D2 and B20 or
B22 terminals.
Repair short to power in the wire between
the D2 terminal and the shift control solenoid
valve B.
Go to step 5.
5. Turn the ignition switch OFF.
6. Measure the resistance between the D2 and B20 or
B22 terminals.
Go to step 11.
Go to step 7.
7. Check for continuity between the B20 and B22
terminals and body ground.
Go to step 8.
Repair open in the wires between the B20 and
B22 terminals and body ground (G101), or repair
poor ground (G101).
(cont’d)
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is ther e voltage?
Is ther e 12 25 ?
Is ther e continuity?
03/07/29 09:31:03 61S0X050_140_0080