Honda 2004 Odyssey, Service Manual

Page: 2367 / 2459

−
−
−
−
−
＊０３
０４
０５
０６
YES
NO
YES
NO
23-302
SRS
DTC Troubleshooting (cont’d)
C505
YEL/GRN
BLK
A
14. Disconnect dashboard wire harness A 21P
connector C505 from the right side wire harness.
15. Turn the ignition switch ON (II).
16.
Open in the YEL/GRN wire of the right side
wire harness; replace the right side wire harness.
Open in the YEL/GRN wire of the dashboard
wire harness; replace the faulty harness.
17. Turn the ignition switch OFF.
18. Check resistance between the No. 6 terminal of the
ground. There should be 0 1.0 .
Go to step 19.
Open in the BLK wire of the right side wire
harness; check for poor ground connection at G851.
If the connection is OK, replace the right side wire
harness.
19. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
20. Disconnect both seat belt tensioner 2P connectors
(A).
Wire side of female terminals
Is ther e batter y voltage?
Is the r esistance as specif ied?
03/07/29 10:41:00 61S0X050_230_0302
Check for voltage between the No. 4 terminal of
dashboard wire harness A 21P connector C505 and
body ground. There should be battery voltage.
DASHBOARD WIRE HARNESS A 21P CONNECTOR C505
right side wire harness 6P connector C and body
Wire side of female terminals
RIGHT SIDE WIRE HARNESS 6P CONNECTOR C