Honda 2004 Odyssey, Service Manual

Page: 1961 / 2459

０３
＊０１
０５
［ ］ ［ ］ ［ ］
［ ］
Left Sliding Door Right Sliding Door (With Security System)
22-282
Power Door Locks/Factory Keyless/Factory Security
Door Lock Knob Switch Test (cont’d)
A
Terminal
Position
LOCK
UNLOCK
D1 D5 D6
D4 D3
: With Security
A
1. Remove the left sliding door panel (see page 20-13).
2. Disconnect the connector (A) from the actuator.
3. Check for continuity between the terminals in each
switch position according to the table.
4. If the continuity is not as specified, replace the
switch.
1. Remove the right sliding door panel (see page 20-
13).
2. Disconnect the connector (A) from the actuator.
3. Check for continuity between the E3 and E4
terminals in each switch position.
• There should be continuity with the knob switch
in UNLOCK.
• There should be no continuity with the knob
switch in LOCK.
4. If the continuity is not as specified, replace the
switch.
Without Security:
With Security:
Terminal side of
male terminals
Terminal side of
male terminals
03/07/29 10:25:57 61S0X050_220_0284