Honda 2004 Odyssey, Service Manual

Page: 2380 / 2459

−
−
−
−
−
−
−
−
Ｓ０Ｘ４ＡＳＩＫ７９１０００Ｒ８６１ＸＦＡＡＴ００
’03-04 Models
DTC 86-1x (86-10 to 86-19, 86-1A to 86-1F):
DTC 86-2x (86-20 to 86-29, 86-2A to 86-2F):
YES
NO
YES
NO
YES
NO
YES
NO
23-315
Faulty Seat-back Sensor
Faulty Support Sensor
1. Erase the DTC memory (see page 23-39).
2. Turn the ignition switch ON (II), and check that the
SRS indicator comes on for about 6 seconds and
then goes off.
Go to step 3.
Intermittent failure, system is OK at this time.
Go to Troubleshooting Intermittent Failures (see
page 23-39).
3. Check the connection at the OPDS sensor harness
connector and the OPDS unit connector.
Go to step 4.
Reconnect the OPDS sensor harness
connector, and clear the DTC.
4. Replace the OPDS sensor/seat back foam (see page
20-102), and reinitialize the OPDS (see page 23-41).
5. Erase the DTC memory, then check for DTC 86-1x
or 86-2x.
Go to step 6.
The system is OK.
6. Replace the OPDS unit (see page 23-387), and
reinitialize the OPDS.
7. Erase the DTC memory, then check for DTC 86-1x
or 86-2x.
Replace the SRS unit (see page 23-384).
The system is OK.
Does the SRS indicator stay on?
Ar e the connections OK ?
Is DT C 86-1x or 86-2x indicated?
Is DT C 86-1x or 86-2x indicated?
03/07/29 10:41:09 61S0X050_230_0315