Honda 2004 Odyssey, Service Manual

Page: 2268 / 2459

−
−
−
−
＊０２
＊０１
＊０３
YES
NO
YES
NO
23-203
CABLE
REEL 4P CONNECTOR
07XAZ-SZ30100
A
C851
SRS FLOOR HARNESS 28P CONNECTOR C851
GRN/YEL GRN/WHT GRN GRN/
BLK
12. Check resistance between the terminals of SRS
simulator lead F. There should be 1 or less.
Faulty SRS unit or poor contact at SRS unit
connector A (28P) and the SRS unit. Check the
connection between the connector and the SRS
unit. If the connection is OK, replace the SRS unit
(see page 23-382).
Go to step 13.
13. Disconnect the SRS floor harness 28P connector (A)
from SRS main harness 28P connector C851.
14. Check resistance between the No. 9 and No. 10
terminals of the SRS floor harness 28P connector
C851, and between the No. 3 and No. 4 terminals.
There should be 1
or less.
Go to step 15.
Open or increased resistance in the SRS floor
harness; replace the SRS floor harness.
15. Disconnect the cable reel 4P connector from the
SRS main harness.
16. Connect the SRS inflator simulator to SRS
simulator lead F.
(cont’d)
Terminal side of male terminals
Is the r esistance as specif led?
Is the r esistance as specif ied?
03/07/29 10:37:45 61S0X050_230_0203