Honda 2004 Odyssey, Service Manual

Page: 982 / 2459

０１
１３
０２
Ｓ０Ｘ４ＡＡ１Ｅ１０４１０４０００００ＫＡＡＴ００
Special Tools Required
14-369
Transmission Removal
A
18 x 1.5 mm
49 N·m (5.0 kgf·m,
36 lbf·ft)
B
A
B
C
• Engine support hanger 07XAA-001030A
• Engine hanger balance bar VSB02C000019
• Subframe adapter EQS07AODSY0
(Available through the Honda Tool and Equipment
Program, 888-424-6857)
1. Before disconnecting the battery, make sure you
have the anti-theft code for the radio, then write
down the frequencies for the radio’s preset stations.
2. Remove the bolt securing the lower portion of the
windshield washer reservoir opening. Remove the
support rod, then fix the hood in a vertical position
using the support rod.
3. Remove the engine covers.
4. Remove the intake air duct, resonator cover, and air
cleaner housing assembly.
5. Disconnect the battery negative terminal, then
remove the battery positive terminal.
6. Remove the battery hold-down bracket, then
remove the battery and battery tray.
7. Remove the battery cable clamps, connector, and
relay bracket from the battery base.
8. Remove the battery base.
9. Raise the vehicle, and make sure it is securely
supported.
10. Remove the splash shield.
11. Remove the drain plug (A), and drain the automatic
transmission fluid (ATF). Reinstall the drain plug
and a new sealing washer (B).
12. Remove the breather tube (A) from its clamp (B) on
the radiator hose (C).
(cont’d)
03/07/29 09:40:20 61S0X050_140_0372