Honda 2004 Odyssey, Service Manual

Page: 1325 / 2459

−
−
−
−
−
−
０３
０４
０５
YES
NO
YES
NO
YES
NO
19-124
ABS/TCS Components
DTC Troubleshooting (cont’d)
MODULATOR UNIT CONNECTOR
SOLENOID (BRN/BLK)
MODULATOR UNIT CONNECTOR
SOLENOID (BRN/BLK)
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
FSR (YEL/GRN)
7. Measure the voltage between terminal No. 2 and
body ground.
Go to step 8.
Repair open in the wire between the ABS fail-
safe relay and the modulator unit.
8. Remove the jumper wire from the ABS fail-safe
relay connector.
9. Measure the voltage between the modulator unit
connector terminal No. 2 and body ground.
Repair short to power in the wire between
the ABS fail-safe relay, TCS relay, modulator unit,
and under-hood ABS relay box.
Go to step 10.
10. Disconnect the ABS/TCS control unit connector A
(26P).
11. Turn the ignition switch ON (II).
12. Measure the voltage between terminal No. 25 and
body ground.
Repair short to power in the wire between
the ABS/TCS control unit and the ABS fail-safe
relay.
Go to step 13.
Terminal side of female terminals
Terminal side of female terminals
Wire side of female terminals
Is ther e batter y voltage?
Is ther e batter y voltage?
Is ther e batter y voltage?
03/07/29 09:57:42 61S0X050_190_0124