Honda 2004 Odyssey, Service Manual

Page: 654 / 2459

――― ―――
――― ―――
PCM CONNECTOR C (22P)
Terminal
Number
Wire color Signal Description Measuring Conditions/Terminal Voltage
14-41
•
•
•
•
•
•
C10 YEL LC Torque converter clutch
solenoid valve control During lock-up condition: Battery voltage
During no lock-up condition: 0 V
C11 BLU/BLK OP2SW A/T 2nd clutch pressure
switch signal input With ignition switch ON (II): Battery voltage
(No 2nd clutch pressure)
C12 BLU ATP 2 Transmission range switch
2 position input In the 2 position: 0 V
In other than the 2 position: Battery voltage
C13 YEL ATP D4 Transmission range switch
D4 position input In the D4 position: 0 V
In other than the D4 position: About 5 V
C14 GRN NCSG Countershaft speed sensor
ground
C15 BLU NC Countershaft speed sensor
input Depending on vehicle speed: Pulsing signal
When vehicle stopped: About 0 V
C16 Not used
C17 GRN SH C Shift solenoid valve C
control Battery voltage in these positions:
1
D4 and D3 in 1st and 3rd gears
0 V in these positions:
2
D4 and D3 in 2nd gear
D4 in 4th gear
P, R, and N
C18 Not used
C19 WHT/RED OP3SW A/T 3rd clutch pressure
switch signal input With ignition switch ON (II): Battery voltage
(No 3rd clutch pressure)
C20 BRN ATP 1 Transmission range switch
1 position input In the 1 position: 0 V
In other than the 1 position: Battery voltage
C21 WHT ATP R Transmission range switch
R position input In the R position: 0 V
In other than the R position: Battery voltage
C22 BLU/WHT ATP NP Transmission range switch
P and N positions input In the P and N positions: 0 V
In other than the P and N positions: About
5 V
(cont’d)
03/07/29 09:29:30 61S0X050_140_0044