Honda 2004 Odyssey, Service Manual

Page: 767 / 2459

２５
２６
２７
14-154
Automatic Transmission
Transmission Installation (cont’d)
B
A
C
12 x 1.25 mm
54 N·m (5.5 kgf·m,
40 lbf·ft)
45. Connect the ATF cooler hoses (A) to the ATF cooler
lines (B) (see page 14-156). Clamp the ATF cooler
hose with the clamp (C) on the starter.
46. Install the battery base bracket and battery base.
47. Install the battery cable clamps, connector, and
relay bracket on the battery base.
48. Install the battery tray and battery, then secure the
battery with its hold-down bracket.
49. Install the intake air duct, resonator cover, and air
cleaner housing assembly.
50. Install the engine covers.
51. Refill the transmission with ATF (see step 5 on page
14-137).
52. Connect the battery positive terminal, then connect
the negative terminal.
53. Set the parking brake. Start the engine, and shift
the transmission through all gears three times.
54. Check the shift lever operation, A/T gear position
indicator operation, and shift cable adjustment.
55. Check and adjust the front wheel alignment (see
page 18-5).
56. Reinstall the support rod of the hood to the proper
location, and secure the windshield washer
reservoir opening with the bolt.
57. Start the engine and let it reach normal operating
temperature (the radiator fan comes on) with the
transmission in the P or N position, then turn it off
and check the ATF level (see page 14-136).
58. Do the PCM idle learn procedure (see page 11-202).
59. Do a road test (see page 14-125).
60. Enter the anti-theft code for the radio, then enter
the radio station presets, and set the clock.
61. Loosen the front mount nut after the road test, then
retighten the nut to the specified torque.
03/07/29 09:33:53 61S0X050_140_0157