Honda 2004 Odyssey, Service Manual

Page: 2241 / 2459

−
−
−
−
０３
０１
＊０１
０２
YES
NO
YES
NO
23-176
SRS
DTC Troubleshooting (cont’d)
B
SRS UNIT CONNECTOR B (18P)
C852
A
SRS FLOOR SUBHARNESS 28P CONNECTOR
11. Disconnect SRS unit connector B (18P) from the
SRS unit.
12. Turn the ignition switch ON (II).
13. Check for voltage between the No. 8 terminal of
SRS unit connector B (18P) and body ground, and
between the No. 18 terminal and body ground.
There should be 0.5 V or less.
Faulty SRS unit; replace the SRS unit (see
page 23-382).
Go to step 14.
14. Turn the ignition switch OFF.
15. Disconnect the SRS floor subharness 28P
connector (A) from the SRS floor harness 28P
connector C852.
16. Turn the ignition switch ON (II).
17. Check for voltage between the No. 23 terminal of
the SRS floor subharness 28P connector and body
ground, and between the No. 24 terminal and body
ground. There should be 0.5 V or less.
Short to power in the SRS floor harness;
replace the SRS floor harness.
Short to power in the SRS floor subharness or
right side wire harness; replace the faulty
harness.
Wire side of female terminals
Wire side of female terminals
Is the voltage as specif ied?
Is the voltage as specif ied?
03/07/29 10:36:21 61S0X050_230_0176