Honda 2004 Odyssey, Service Manual

Page: 988 / 2459

１０
０２
０３
０４
14-375
C
A
B
A
B
A
B
EQS07AODSY0
A
EQS07AODSY0
B
C
54 N·m
(5.5 kgf·m, 40 lbf·ft)
45. Make reference marks (A) on the body across the
marks (B) on the edge of the front subframe (C).
46. Loosen the four bolts (A) holding the adjustable
arms (B) of the front subframe adapter (T/N
EQS07AODSY0) to its center plate.
NOTE: The adapter is designed to be used with the
Honda transmission jack (model number LSL-
W93714) or powertrain lift (model number OTC-
1585), both available through the Honda Tool and
Equipment Program. It will also work with most
commercially available transmission jack.
47. Line up the slots in the arms with the bolt holes on
the corner of the jack base, then attach the adapter
to the jack base with the bolts (A) that came with
the jack. Tighten the bolts securely.
48. Raise the jack to vehicle height, then attach the
adapter to the front subframe by sliding the
adapter’s nut plates (B), between the subframe and
the body.
49. Insert the nut plate bolts through the holes in the
adapter and the subframe; then thread the bolts (C)
into the nut plates and tighten them to 54 N·m
(5.5 kgf·m, 40 lbf·ft).
(cont’d)
03/07/29 09:40:27 61S0X050_140_0378