Honda 2004 Odyssey, Service Manual

Page: 120 / 2459

＊０２
０２
０３
０４
Special Tools Required
4-33
A
B
A
B
C
A
B
C
D
• Driver 07749-0010000
• Attachment, 42 x 47 mm 07746-0010300
NOTE: Refer to the Exploded View as needed during
this procedure.
1. Test the alternator and regulator before you
remove them (see step 1 on page 4-22).
2. Remove the alternator (see page 4-27).
3. If the front bearing needs replacing, remove the
pulley locknut with a 10 mm wrench (A) and a
22 mm wrench (B). If necessary, use an impact
wrench.
4. Remove the three flange nuts (A) and the screw (B)
from the alternator, then remove the plate terminal
(C).
5. Remove the washer nut (A) and insulator (B) from
the ‘‘B’’ terminal, then remove the end cover (C)
and dust seal (D).
6. Remove the brush holder.
(cont’d)
03/07/29 09:08:10 61S0X050_040_0033