Honda 2004 Odyssey, Service Manual

Page: 1318 / 2459

−
−
−
−
−
−
０１
＊０４
＊０５
＊０６
DTC Appropriate Terminal
YES
NO
DTC Appropriate Terminal
YES
NO
19-117
JUMPER
WIRE
ABS FAIL-SAFE RELAY CONNECTOR
SOLENOID
(BRN/BLK)
ABS/TCS CONTROL UNIT CONNECTOR C (12P)
FL-OUT (YEL/BLU)
RR-IN (RED/WHT)
FL-IN (RED/BLU)
RL-OUT (YEL/GRN)
FR-IN (RED/BLK)
RL-IN (RED/GRN)
RR-OUT (YEL/WHT) FR-OUT (YEL/BLK)
ABS/TCS CONTROL UNIT CONNECTOR C (12P)
ABS/TCS CONTROL UNIT CONNECTOR A (26P)
(YEL/WHT)
FL-OUT
(YEL/GRN) (YEL/BLK)
(RED/BLU) (RED/GRN) (RED/BLK) (RED/WHT)
(YEL/BLU)
RR-OUT RL-OUT FR-OUT
RR-IN FL-IN RL-IN FR-IN
NCR
(GRY) NOR
(LT BLU)
NOL
(RED/GRN) NCL
(YEL/GRN)
12. Connect ABS fail-safe relay connector terminal
No. 2 to body ground with a jumper wire. The wire
colors of the ABS fail-safe relay connector are WHT
/GRN, BRN/BLK, BLK, and YEL/GRN.
13. Check resistance between appropriate ABS/TCS
control unit connector C (12P) terminal and body
ground (see table).
IN: 8
10 (at 68°F, 20°C)
OUT: 3 5 (at 68°F, 20°C)
31: FR-IN No. 11
32: FR-OUT No. 6
33: FL-IN No. 9
34: FL-OUT No. 4
35: RR-IN No. 8
36: RR-OUT No. 3
37: RL-IN No. 10
38: RL-OUT No. 5
Go to step 14.
Replace the modulator unit.
14. Disconnect the modulator unit connector, and
remove the jumper wire from the ABS fail-safe
relay connector terminal.
15. Check for continuity between appropriate ABS/TCS
control unit connector C (12P) terminal and all other
ABS and TCS solenoid circuit terminals (see table).
31: FR-IN No. 11
32: FR-OUT No. 6
33: FL-IN No. 9
34: FL-OUT No. 4
35: RR-IN No. 8
36: RR-OUT No. 3
37: RL-IN No. 10
38: RL-OUT No. 5
Repair short in the appropriate wires
between the ABS/TCS control unit and the
modulator unit.
Go to step 16.
(cont’d)
Terminal side of female terminals
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is the r esistance OK ?
Is ther e continuity?
03/07/29 09:57:37 61S0X050_190_0117