Honda 2004 Odyssey, Service Manual

Page: 237 / 2459

０１
＊０２
＊０３
Main Bearing Selection
Crankshaft Bore Code Location
Main Journal Code Locations (Numbers or Bars)
7-8
Engine Block
Crankshaft Main Bearing Replacement (cont’d)
No. 1 BORE
(PULLEY END)
No. 4 BORE
(DRIVE PLATE END)
No. 4 JOURNAL
(DRIVE PLATE END)
No. 1 JOURNAL
(PULLEY END)
NOTE:
• When using bearing halves of
different colors, it does not
matter which color is used in the
top or bottom.
• Color code is on the edge of
the bearing.
Smaller
bearing
(Thicker) Smaller
main
Journal
Larger crank bore
Smaller bearing (Thicker)
A or I B or II C or III
D or IIII
Yellow Green
Yellow
Yellow
Green
Brown
Green/
Brown
Brown
Green
Yellow/
Green
Pink/
Yellow
Yellow/
Green
Pink/
Yellow
Pink
Green/
Brown
Brown/
Black
Green/
Brown
Red/
Pink
Pink
Pink/
Yellow
Yellow/
Green
Yellow
Yellow/
Green
Green
1 or I
2 or II
3 or III
4 or IIII
5 or IIIII
6 or IIIIII
1. Letters or bars have been stamped on the end of
the block as a code for the size of each of the four
main journal bores.
If you can not read the codes because of an
accumulation of dirt and dust, do not scrub them
with a wire brush or scraper. Clean them only with
solvent or detergent.
2. Numbers or bars have been stamped on the
crankshaft No. 1 web as a code for the main journal
sizes.
3. Use the crankshaft bore codes and journal codes to
select the appropriate main bearings from the table.
03/07/29 09:12:57 61S0X050_070_0008