Honda 2004 Odyssey, Service Manual

Page: 2349 / 2459

−
−
−
−
−
−
＊０１
＊０２
０５
YES
NO
YES
NO
23-284
SRS
DTC Troubleshooting (cont’d)
BLK BLU
BLK GRY
DRIVER’S SEAT BELT BUCKLE SWITCH
3P CONNECTOR
DRIVER’S SEAT WIRE HARNESS 3P CONNECTOR
(WITH POWER SEAT)
LEFT SIDE WIRE HARNESS 3P CONNECTOR
(WITHOUT POWER SEAT)
BLK
A
7. Unbuckle the driver’s seat belt.
• Check resistance between the No. 1 and No. 2
terminals of the driver’s seat belt buckle switch
3P connector. There should be 0
1 .
• Check resistance between the No. 1 and No. 3
terminals of the same connector. There should
be an open circuit, or at least 1 M
.
Go to step 8.
Replace the driver’s seat belt buckle assembly,
then clear the DTC.
8. Check resistance between the No. 1 terminal of the
driver’s seat wire harness (with power seat) or left
side wire harness (without power seat) 3P
connector and body ground. There should be
0
1 .
Go to step 9.
Open in the driver’s seat wire harness (with
power seat), left side wire harness (without power
seat) or poor ground connection at G551. If G551 is
OK, replace the faulty harness.
9. Disconnect the battery negative cable and wait for
3 minutes.
10. Disconnect both seat belt tensioner 2P connectors
(A).
Terminal side of male terminals
Terminal side of male terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:39:47 61S0X050_230_0284