Honda 2004 Odyssey, Service Manual

Page: 649 / 2459

０４
Electronic Control System (cont’d)
PCM Inputs and Outputs (1999-2000 models)
PCM CONNECTOR A (32P)
Terminal
Number
Wire color Signal Description Measuring Conditions/Terminal Voltage
14-36
Automatic Transmission
System Description (cont’d)
PCM Connector Terminal Locations
A (32P) B (25P) C (31P) D (16P)
The PCM terminal voltage and measuring conditions for the A/T control system are shown.
A5 BLU/GRN CRS Downshift signal input from
cruise control unit When cruise control is used: About 1 V
A9 BLU/WHT VSS OUT Vehicle speed signal
detected from countershaft
speed sensor, and sent to
speedometer and odometer Depending on vehicle speed: Pulsing signal
A10 BRN SCS Timing and adjustment
service check signal With ignition switch ON (II) and DLC open:
5 V
With ignition switch ON (II) and DLC
connected with HDS: 0 V
A14 GRN/BLK D4 IND D4 indicator control When ignition switch is first turned ON (II):
Battery voltage for 2 seconds
In the D4 position: Battery voltage
A28 WHT/RED ILU Interlock control With ignition switch ON (II), brake pedal
pressed, and accelerator pedal released:
Battery voltage
A32 WHT/BLK BK SW Brake switch signal output Brake pedal pressed: Battery voltage
Brake pedal released: 0 V
03/07/29 09:29:29 61S0X050_140_0039