Honda 2004 Odyssey, Service Manual

Page: 2270 / 2459

−
−
−
−
−
−
０６
＊０１
＊０２
YES
NO
YES
NO
YES
NO
23-205
CABLE
REEL 4P CONNECTOR
07XAZ-SZ30100
C851
A
SRS MAIN HARNESS 28P CONNECTOR C851
GRN/YEL GRN/WHT GRN GRN/
BLK
6. Reconnect the battery negative cable.
7. Erase the DTC memory.
8. Read the DTC (see page 23-38).
Go to step 9.
Short in the driver’s airbag first or second
inflator; replace the driver’s airbag (see page 23-
368).
9. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
10. Disconnect the cable reel 4P connector from the
SRS main harness.
11. Disconnect the SRS inflator simulator from SRS
simulator lead F.
12. Check resistance between the terminals of SRS
simulator lead F. There should be an open circuit,
or at least 1 M
.
Go to step 13.
Replace the cable reel (see page 23-377).
13. Disconnect SRS floor harness 28P connector (A)
from the SRS main harness connector C851.
14. Check resistance between the No. 9 and No. 10
terminals of SRS main harness 28P connector C851,
and between the No. 3 and No. 4 terminals. There
should be an open circuit, or at least 1 M
.
Go to step 15.
Short in the SRS main harness; replace the
SRS main harness.
(cont’d)
Wire side of female terminal
Is DT C 11-3x or 11-6x indicated?
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:37:46 61S0X050_230_0205