Honda 2004 Odyssey, Service Manual

Page: 2257 / 2459

−
−
−
−
０３
＊０３
１２
YES
NO
YES
NO
23-192
SRS
DTC Troubleshooting (cont’d)
SRS UNIT CONNECTOR B (18P)
C851
A
SRS MAIN HARNESS 28P CONNECTOR
26. Check for voltage between the No. 3 terminal of
SRS unit connector B (18P) and body ground. There
should be 0.5 V or less.
Faulty OPDS unit or SRS unit. Replace the
OPDS unit (see page 23-387). If the problem is still
present, replace the SRS unit (see page 23-382).
Go to step 35.
27. Disconnect the SRS main harness 28P connector
(A) from the SRS floor harness 28P connector C851.
28. Check resistance between the No. 16 terminal of
the SRS main harness 28P connector and body
ground. There should be an open circuit, or at least
1 M
.
Short in the SRS floor harness; replace the
SRS floor harness.
Go to step 29.
Wire side of female terminals
Wire side of female terminals
Is the voltage as specif ied?
Is the r esistance as specif ied?
03/07/29 10:36:32 61S0X050_230_0192