Honda 2004 Odyssey, Service Manual

Page: 1423 / 2459

＊０１
Ｓ０Ｘ４Ａ００Ｊ２６２７３４０００００ＫＤＡＴ１１
［ ］
［ ］
［ ］
［ ］
［ ］
Sealant: Cemedine P/N 08712-0004, or equivalent
20-58
Interior Trim
Trim Removal/Installation - Door Area
A : Clip, 3 B : Clip, 1 C : CIip, 1
(White)
D : Clip, 9
(White)
E : Clip, 3
(Black)
UPPER
ANCHOR
COVER
SLIDING DOOR
OPENING TRIM
SLIDING DOOR
SILL TRIM
CENTER PILLAR
UPPER TRIM
FRONT SEAT BELT
SHOULDER ANCHOR
ADJUSTER
FRONT DOOR
OPENING TRIM
FRONT PILLAR TRIM
FRONT DOOR
SILL TRIM
CENTER PILLAR
LOWER TRIM PANEL
A Portions
FRONT SEAT BELT UPPER ANCHOR BOLT
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 lbf·ft)
Fastener Locations
FRONT SEAT BELT
LOWER ANCHOR BOLT
7/16-20 UNF
32 N·m (3.3 kgf·m, 24 lbf·ft)
SLIDING DOOR
LOWER
WEATHERSTRIP
REAR SIDE
TRIM PANEL
D
D
A
B
A
A
A
A
A
A
SEALANT
3600 mm
(141.7 in.)
D
D
D
LOWER ANCHOR
COVER
F : Clip, 1
D
D
D
C
700 mm
(27.6 in.)
’03-04 models
GROMMET
RIGHT CENTER PILLAR
LOWER TRIM PANEL
HOOK
DOOR OPENING
TRIM
KICK PANEL
E
E
E
D
F
NOTE:
• Put on gloves to protect your hands.
• When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
• Take care not to bend or scratch the trim and panels.
1. Remove the trim as shown.
2. Install the trim in the reverse order of removal, and note these items:
• Replace any damaged clips.
• Push the clips into place securely.
• Apply liquid thread lock to the anchor bolts before reinstallation.
• Before installing the anchor bolts, make sure there are no twists or kinks in the seat belts.
• Before installing the sliding door opening trim, fill the bottom of the channel with clear sealant in the area
indicated by the arrow.
Remove the sliding door
lower roller.
Remove the fuel fill
door opener knob.
03/07/29 10:01:42 61S0X050_200_0060