Honda 2004 Odyssey, Service Manual

Page: 2228 / 2459

−
−
−
−
＊０２
０２
Ｓ０Ｘ４ＡＣ５Ｋ７９１０００８１１１１ＦＡＡＴ２０
’02 Model
DTC 11-1:
Special Tools Required
YES
NO
YES
NO
23-163
07SAZ-TB4011A
07XAZ-S1A0200
A
B
A
Open or Increased Resistance in
Driver’s Side Airbag Inflator
• SRS inflator simulator 07SAZ-TB4011A
• SRS simulator lead E 07XAZ-S1A0200
1. Erase the DTC memory (see page 23-38).
2. Turn the ignition switch ON (II), and check that the
SRS indicator comes on for about 6 seconds and
then goes off.
Go to step 3.
Intermittent failure, system is OK at this time.
Go to Troubleshooting Intermittent Failures (see
page 23-39).
3. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
4. Disconnect the left side wire harness 2P connector
(A) from the driver’s side airbag (B).
5. Connect the special tool (2 connector) to the left
side wire harness 2P connector.
6. Reconnect the battery negative cable.
7. Erase the DTC memory.
8. Read the DTC (see page 23-35).
Go to step 9.
Open or increased resistance in the driver’s
side airbag inflator; replace the driver’s side airbag
(see page 23-372).
9. Turn the ignition switch OFF. Disconnect the
battery negative cable, and wait for 3 minutes.
10. Disconnect the front passenger’s side airbag 2P
connector (A).
(cont’d)
Does the SRS indicator stay on?
Is DT C 11-1 indicated?
03/07/29 10:36:11 61S0X050_230_0163