Honda 2004 Odyssey, Service Manual

Page: 2247 / 2459

−
−
−
−
−
−
０１
０２
＊０１
０３
YES
NO
YES
NO
YES
NO
23-182
SRS
DTC Troubleshooting (cont’d)
SRS UNIT CONNECTOR B (18P)
SRS UNIT CONNECTOR B (18P)
C852
A
SRS FLOOR SUBHARNESS 28P CONNECTOR
7. Check resistance between the No. 8 terminal of
SRS unit connector B (18P) and body ground. There
should be an open circuit, or at least 1 M
.
Go to step 8.
Go to step 9.
8. Check resistance between the No. 8 and No. 15
terminals of SRS unit connector B (18P). There
should be an open circuit, or at least 1 M
.
Faulty driver’s side impact sensor or SRS
unit; replace the driver’s side impact sensor (see
page 23-385). If the problem is still present, replace
the SRS unit (see page 23-382).
Go to step 11.
9. Disconnect the SRS floor subharness 28P
connector (A) from the SRS floor harness 28P
connector C852.
10. Check resistance between the No. 18 terminal of
the SRS floor subharness 28P connector and body
ground. There should be an open circuit, or at least
1 M
.
Short to ground in the SRS floor harness;
replace the SRS floor harness.
Short to ground in the SRS floor subharness
or left side wire harness; replace the faulty
harness.
Wire side of female terminals
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:36:26 61S0X050_230_0182