Honda 2004 Odyssey, Service Manual

Page: 1891 / 2459

０１
０２
Ｓ０Ｘ４ＡＺ８Ｊ５４４６０６４７１０１ＦＥＡＴ０１
０１
＊０１
Ｓ０Ｘ４ＡＺＢＪ５４４６０６４７１０１ＦＥＡＴ０２
’99-02 models ’03-04 models
Motor Test
Pulser Test
Motor Test
22-212 22-212
Power Windows
Driver’s Window Motor Test
Terminal
Direction
UP
1 2
DOWN
UP
DOWN
Terminal
Direction
A1 A2
1. Remove the driver’s door panel (see page 20-7).
2. Disconnect the 4P connector from the window
motor.
3. Test the motor in each direction by connecting
battery power and ground according to the table.
When the motor stops running, disconnect one
lead immediately.
4. If the motor does not run or fails to run smoothly,
replace it.
5. Connect the test leads of an analog ohmmeter to
the No. 3 and No. 4 terminals.
6. Run the motor by connecting power and ground to
the No. 1 and No. 2 terminals. The ohmmeter
needle should move back and forth alternately.
7. If the test is not as specified, replace the driver’s
window motor.
1.
2. Disconnect the 2P and 4P connectors from the
window motor.
3. Test the motor in each direction by connecting
battery power and ground according to the table.
When the motor stops running, disconnect one
lead immediatery.
4. If the motor does not run or fails to run smoothly,
replace it.
Terminal side of male terminals
03/07/29 10:24:11 61S0X050_220_0214
Remove the driver’s door panel (see page 20-7).