Honda 2004 Odyssey, Service Manual

Page: 1465 / 2459

＊０１
Ｓ０Ｘ４ＡＺＢＪ４６１２７０５３７３０ＭＦＡＴ００
’03-04 models
20-100
Seats
Front Passenger’s Seat Riser Disassembly/Reassembly (cont’d)
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
8 x 1.25 mm
21 N·m (2.1 kgf·m,
15 lbf·ft)
OUTER WEIGHT
SENSOR
INNER WEIGHT
SENSOR
CENTER TABLE
INNER COVER
CENTER TABLE
(For some models)
CENTER TABLE ARM
OUTER COVER
CLIPS
CLIPS
(Four places)
INNER RISER COVER
OUTER RISER COVER
SEAT RISER
WEIGHT
SENSOR
UNIT
8 x 1.25 mm
22 N·m (2.2 kgf·m,
16 lbf·ft)
HOOK
UNDER SEAT STORAGE
TRAY GUIDE
(For some models)
UNDER SEAT STORAGE TRAY
(For some models)
NAVIGATION UNIT
(For some models)
CLIPS
CLIPS
HOOK
8 x 1.25 mm
21 N·m (2.1 kgf·m,
15 lbf·ft)
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
CLIPS
(Four places)
6 x 1.0 mm
9.8 N·m (1.0 kgf·m, 7.2 lbf·ft)
The front passenger’s weight sensor (SWS) unit must be calibrated after any of these actions (see page 23-42):
• Front passenger’s seat replacement (including any seat components)
• Replacement of the seat weight sensors
• Replacement of the seat weight sensor unit
NOTE:
• When tightening the weight sensor mounting nuts, starting at the rear, tighten the nuts in the sequence shown.
• Make sure the weight sensor unit connectors are plugged in properly.
Replace.
Replace.
Replace.
03/07/29 10:03:13 61S0X050_200_0102