Honda 2004 Odyssey, Service Manual

Page: 1131 / 2459

− − −
− − −
０１
０２
Ｓ０Ｘ４Ａ００Ｆ００００００４７０４１ＭＣＡＴ００
Special Tools Required
Inspection
Tension:
Used Belt:
390 540 N (40 55 kgf, 88 120 lbf)
New Belt: 740 880 N (75 90 kgf, 170 200 lbf)
Adjustment
Belt Tension Gauge Method
17-12
Power Steering
Pump Belt Inspection and Adjustment
07JGG-001000A or
07JGG-001010A
A
24 N·m (2.4 kgf·m, 17 lbf·ft)
B
24 N·m
(2.4 kgf·m,
17 lbf·ft)
C
• Belt tension gauge set 07JGG-001000A
• Belt tension gauge 07JGG-001010A
1. Attach the belt tension gauge to the belt with the
gauge face toward the engine, and measure the
tension of the belt. Follow the manufacture’s
instructions. If the belt is worn or damaged, replace
it.
NOTE: Remove the belt tension gauge carefully to
avoid hitting the gauge reset lever.
2. If you installed a new belt, run the engine for
5 minutes, then readjust the belt to the used belt
specifications.
3. Loosen the power steering pump mounting nut (A)
and bolt (B).
4. Turn the adjusting nut (C) to get the proper belt
tension, then retighten the mounting nut and bolt.
5. Start the engine and turn the steering wheel from
lock-to-lock several times, then stop the engine and
recheck the tension of the belt.
03/07/29 09:48:56 61S0X050_170_0012