Honda 2004 Odyssey, Service Manual

Page: 2179 / 2459

−
−
−
−
０４
０５
＊０１
０７
YES
NO
YES
NO
23-114
SRS
DTC Troubleshooting (cont’d)
A
SRS UNIT CONNECTOR A (18P)
C851
A
SRS MAIN HARNESS 28P CONNECTOR
12. Disconnect SRS unit connector A (18P) from the
SRS unit.
13. Disconnect the special tool from the SRS main
harness 4P connector.
14. Check resistance between the No. 4 and No. 13
terminals and between the No. 5 and No.14
terminals of SRS unit connector A (18P). There
should be an open circuit, or at least 1 M
.
Faulty SRS unit; replace the SRS unit (see
page 23-382).
Go to step 15.
15. Disconnect the SRS main harness 28P connector
(A) from the SRS floor harness 28P connector C851.
16. Check resistance between the No. 7 and the No. 8
terminals and between the No. 1 and the No. 2
terminals of the SRS main harness 28P connector.
There should be an open circuit, or at least 1 M
.
Short in the SRS floor harness; replace the
SRS floor harness.
Short in the SRS main harness; replace the
SRS main harness.
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:34:34 61S0X050_230_0114