Honda 2004 Odyssey, Service Manual

Page: 2424 / 2459

−
−
−
−
−
３０
＊１２
３２
YES
NO
YES
NO
23-359
SRS UNIT CONNECTOR C (8P)
A
C851
SRS MAIN HARNESS 28P CONNECTOR
44. Check resistance between the No. 6 terminal of
SRS unit connector C (8P) and body ground. There
should be 0
1.0 .
Faulty SRS unit or poor contact at SRS unit
connector C (8P); check the connection. If the
connection is OK, replace the SRS unit (see page
23-382).
Open in the SCS line between the No. 6
terminal of SRS unit connector C (8P) and the No. 9
terminal (BRN wire) of the Data Link Connector
(DLC) (16P), or open between the No. 4 terminal of
the Data Link Connector (DLC) (16P) and body
ground. Repair the open wire(s).
45. Disconnect the SRS main harness 28P connector
(A) from the SRS floor harness 28P connector C851.
46. Check resistance between the No. 25 terminal of
SRS main harness 28P connector and body ground.
There should be an open circuit, or at least 1 M
.
Short to ground in the SRS floor harness;
replace the SRS floor harness.
Short to ground in the BLU wire of the
dashboard wire harness or in the SRS main
harness; replace the faulty harness.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:42:37 61S0X050_230_0359