Honda 2004 Odyssey, Service Manual

Page: 1420 / 2459

０１
Ｓ０Ｘ４Ａ００Ｊ５４４０００４８１０１ＫＢＡＴ２０
20-55
Quarter Glass and Regulator Replacement
Fastener Locations
A : Screw, 2
5 x 0.8 mm
4 N·m
(0.4 kgf·m,
3 lbf·ft)
B Bolt, 4 (Power)
Bolt, 2 (Manual)
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
B
QUARTER GLASS OPENER
GLASS SEAL
QUARTER GLASS
OPENER CONNECTOR
QUARTER GLASS
QUARTER GLASS HINGE BASE
A
A
QUARTER SEAL
QUARTER
GLASS
14 mm
(0.51 in.)
CAP
SCREW
SEAL
ATTACHMENT PIN
QUARTER GLASS
ATTACHMENT
LOWER END CAP
E-CLIP
LOCK PIN
SEAL
GLASS LOCK
B
QUARTER GLASS LOCK
NOTE:
• When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related
parts, to prevent damage.
• Put on gloves to protect your hands.
1. Remove the quarter glass and the quarter glass opener or the quarter glass lock as shown.
2. Install the quarter glass and the opener or the lock in the reverse order of the removal, and note these items:
• If necessary, replace the quarter glass seal.
• The glass and body edges should be parallel.
• Make sure the glass locks properly. If necessary adjust the quarter glass opener or quarter glass lock mount
position.
• Check for water leaks.
Remove the rear pillar trim.
Remove the rear pillar trim.
03/07/29 10:01:37 61S0X050_200_0057