Honda 2004 Odyssey, Service Manual

Page: 822 / 2459

＊０１
Ｓ０Ｘ４ＡＡ０Ｅ１０４１０９０００００ＭＥＡＴ００
→ →
14-209
Countershaft Disassembly, Inspection, and Reassembly
226 N·m (23.0 kgf·m, 166 lbf·ft) 0
167 N·m (17.0 kgf·m, 123 lbf·ft)
CONICAL SPRING WASHER
IDLER GEAR
TRANSMISSION HOUSING
BEARING
THRUST NEEDLE BEARING
3RD GEAR
NEEDLE BEARING
4TH GEAR
COUNTERSHAFT
PARK GEAR
1ST GEAR
COTTERS, 31 mm
BALL BEARING
2ND GEAR
REVERSE GEAR
REVERSE SELECTOR
SNAP RING
DISTANCE COLLAR
BEARING HUB
REVERSE SELECTOR HUB
LOCKNUT (FLANGE NUT)
NEEDLE BEARING
NEEDLE BEARING
THRUST NEEDLE
BEARING
1. Remove the locknut, and take off components down to the reverse selector hub.
2. Remove the reverse selector hub, 3rd gear, and 1st gear (see page 14-210).
3. Check the bearing in the bearing hub for wear and rough movement. If the bearing is worn or damaged, replace it
(see page 14-212).
4. Inspect the thrust needle bearing and the needle bearing for galling and rough movement.
5. Check the splines for excessive wear and damage.
6. Check the shaft bearing surfaces for scoring, scratches, and excessive wear.
7. Lubricate all parts with ATF, and reassemble the shafts and gears.
8. Install the conical spring washer, reverse selector, reverse selector hub, and distance collar in the direction shown.
Replace.
Selective part
Replace.
Left-hand threads
03/07/29 09:35:28 61S0X050_140_0212