Honda 2004 Odyssey, Service Manual

Page: 339 / 2459

−
−
−
−
−
＊５１
PCM Inputs and Outputs at Connector C (22P) ’01 Model
Terminal
number
Wire color Terminal name Description Signal
11-30
Fuel and Emissions Systems
System Descriptions (cont’d)
NOTE: Standard battery voltage is 12 V.
1 WHT LSA (A/T CLUTCH
PRESSURE CONTROL
SOLENOID VALVE A
SIDE)
Ground for A/T clutch
pressure control solenoid
valve A
2 BLU/YEL SHA (SHIFT SOLENOID
VALVE A) Drives shift solenoid
valve A With engine running in 2nd, 3rd gears: battery
voltage
With engine running in 1st, 4th gears: about 0 V
4 PNK ATPD3 (TRANSMISSION
RANGE SWITCH D3
POSITION) Detects transmission range
switch D3 signals In D3 position: about 0 V
In any other position: battery voltage
6 WHT NMSG (MAINSHAFT
SPEED SENSOR GROUND) Ground for input shaft
(mainshaft) speed sensor
7 RED NM (MAINSHAFT SPEED
SENSOR) Detects input shaft
(mainshaft) speed sensor
signals Depending on vehicle speed: pulses
When engine stopped: about 0 V
8 GRN LSB (A/T CLUTCH
PRESSURE CONTROL
SOLENOID VALVE B
SIDE)
Ground for A/T clutch
pressure control solenoid
valve B
9 GRN/WHT SHB (SHIFT SOLENOID
VALVE B) Drives shift solenoid
valve B With engine running in 1st, 2nd gears: battery
voltage
With engine running in 3rd, 4th gears: about 0 V
10 YEL LC (TORQUE CONVERTER
CLUTCH SOLENOID
VALVE) Drives torque converter
clutch solenoid valve With lock-up ON: battery voltage
With lock-up OFF: about 0 V
11 BLU/BLK OP2SW (2ND OIL
PRESSURE SWITCH) Detects 2nd oil pressure
switch With the ignition switch ON (II): battery voltage
12 BLU ATP2 (TRANSMISSION
RANGE 2 POSITION
SWITCH) Detects transmission range
switch 2 signal In 2 position: about 0 V
In any other position: battery voltage
13 YEL ATPD4 (TRANSMISSION
RANGE D4 POSITION
SWITCH) Detects transmission range
switch D4 signal In D4 position: about 0 V
In any other position: battery voltage
14 GRN NCSG (COUNTERSHAFT
SPEED SENSOR GROUND) Ground for output shaft
(countershaft) speed sensor
15 BLU NC (COUNTERSHAFT
SPEED SENSOR) Detects output shaft
(countershaft) speed sensor
signals Depending on vehicle speed: pulses
When engine stopped: about 0 V
17 GRN SHC (SHIFT SOLENOID
VALVE C) Drives shift solenoid
valve C With engine running in 1st, 3rd gears: battery
voltage
With engine running in 2nd, 4th gears: about 0 V
19 WHT/RED OP3SW (3RD OIL
PRESSURE SWITCH) Detects 3rd oil pressure
switch With the ignition switch ON (II): battery voltage
20 BRN ATP1 (TRANSMISSION
RANGE 1 POSITION
SWITCH) Detects transmission range
switch 1 position signal In 1 position: about 0 V
In any other position: battery voltage
21 WHT ATPR (TRANSMISSION
RANGE R POSITION
SWITCH) Detects transmission range
switch R position signal In R position: about 0 V
In any other position: battery voltage
22 BLU/WHT ATPNP (NEUTRAL/PARK
POSITION SWITCH) Detects transmission range
switch N or P signal In P or N position: about 0 V
In any other position: battery voltage
Wire side of female terminals
03/07/29 09:18:01 61S0X050_110_0030