Honda 2004 Odyssey, Service Manual

Page: 2328 / 2459

−
−
−
−
０６
０７
＊０１
０９
YES
NO
YES
NO
23-263
07YAZ-S3AA100
07SAZ-TB4011A
A
SRS UNIT CONNECTOR A (28P)
RED
BRN/BLK
C851
A
SRS UNIT CONNECTOR A (28P)
RED
BRN/BLK
14. Turn the ignition switch OFF.
15. Connect the special tool (jumper connector) to the
engine compartment left wire harness 2P
connector (A).
16. Check resistance between the No. 15 and No. 27
terminals of SRS unit connector A (28P). There
should be 1
or less.
Faulty left front impact sensor or SRS unit.
Replace the left front impact sensor; if the problem
is still present, replace the SRS unit (see page 23-
384).
Go to step 23.
17. Disconnect the SRS floor harness 28P connector (A)
from SRS main harness connector C851.
18. Check resistance between the No. 15 and No. 27
terminals of the SRS unit connector A (28P). There
should be an open circuit, or at least 1 M
.
Short in the left engine compartment wire
harness or SRS main harness; replace the faulty
harness.
Short in the SRS floor harness; replace the
SRS floor harness.
(cont’d)
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:39:36 61S0X050_230_0263