Honda 2004 Odyssey, Service Manual

Page: 127 / 2459

＊０５
＊０６
＊０７
＊０８
4-40
Charging System
Alternator Overhaul (cont’d)
A
B
C
7. Remove the four bolts, then remove the rear
housing assembly (A), washer (B), and rear bearing
cover (C).
8. If you are not replacing the front bearing and/or
rear bearing, go to step 15. Otherwise, remove the
rotor from the drive end housing.
9. Inspect the rotor shaft for galling, and inspect the
bearing journal surface in the drive end housing for
seizure marks.
• If the rotor is damaged, replace the rotor
assembly.
• If the rotor is OK, go to step 10.
10. Remove the front bearing retainer plate.
11. Drive out the front bearing with a brass drift and
hammer.
03/07/29 09:08:17 61S0X050_040_0040