Honda 2004 Odyssey, Service Manual

Page: 2243 / 2459

−
−
−
−
０３
０１
＊０１
０２
YES
NO
YES
NO
23-178
SRS
DTC Troubleshooting (cont’d)
B
SRS UNIT CONNECTOR B (18P)
C852
A
SRS FLOOR SUBHARNESS 28P CONNECTOR
11. Disconnect SRS unit connector B (18P) from the
SRS unit.
12. Check resistance between the No. 15 and No. 18
terminals of SRS unit connector B (18P), and
between the No. 16 and No. 18 terminals. Then
check resistance between the No. 18 terminal and
body ground. There should be an open circuit, or at
least 1 M
.
Faulty SRS unit; replace the SRS unit (see
page 23-382).
Go to step 13.
13. Disconnect the SRS floor subharness 28P
connector (A) from the SRS floor harness 28P
connector C852.
14. Check resistance between the No. 17 and No. 23
terminals of the SRS floor subharness 28P
connector, and between the No. 27 and No. 23
terminals. Then check resistance between the No.
23 terminal and body ground. There should be an
open circuit, or at least 1 M
.
Short to ground in the SRS floor harness;
replace the SRS floor harness.
Short to ground in the SRS floor subharness
or right side wire harness; replace the faulty
harness.
Wire side of female terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:36:22 61S0X050_230_0178