Honda 2004 Odyssey, Service Manual

Page: 2262 / 2459

−
−
−
−
０３
０４
０１
０６
YES
NO
YES
NO
23-197
I
OPDS UNIT HARNESS CONNECTOR D (8P)
A
OPDS UNIT HARNESS CONNECTOR D (8P)
11. Turn the ignition switch OFF.
12. Disconnect the driver’s under-dash fuse/relay box
connector I from the under-dash fuse/relay box.
13. Turn the ignition switch ON (II).
14. Check for voltage between the No. 3 terminal of the
OPDS unit harness connector D (8P) and body
ground. There should be 0.5 V or less.
Faulty OPDS unit; replace the OPDS unit (see
page 23-387).
Go to step 15.
15. Turn the ignition switch OFF.
16. Disconnect gauge assembly connector A (14P)
from the gauge assembly (see page 22-100).
17. Turn the ignition switch ON (II).
18. Check for voltage between the No. 3 terminal of
OPDS unit harness connector D (8P) and body
ground. There should be 0.5 V or less.
Short to power in the gauge assembly;
replace the gauge assembly.
Go to step 19.
(cont’d)
Wire side of female terminals Wire side of female terminals
Is the voltage as specif ied? Is the voltage as specif ied?
03/07/29 10:36:36 61S0X050_230_0197