Honda 2004 Odyssey, Service Manual

Page: 655 / 2459

０７
Electronic Control System (cont’d)
PCM Inputs and Outputs (2001 model)
PCM CONNECTOR E (31P)
Terminal
Number
Wire color Signal Description Measuring Conditions/Terminal Voltage
14-42
Automatic Transmission
System Description (cont’d)
PCM Connector Terminal Locations
A (31P) B (24P) C (22P) E (31P) D (17P)
E5 GRN/BLK D4 IND D4 indicator control When ignition switch is first turned ON (II):
Battery voltage for 2 seconds
In the D4 position: Battery voltage
E9 WHT/BLK BK SW Brake pedal position switch
signal output Brake pedal pressed: Battery voltage
Brake pedal released: 0 V
E15 WHT/RED ILU Interlock control With ignition switch ON (II), brake pedal
pressed, and accelerator pedal released:
Battery voltage
E16 BRN SCS Timing and adjustment
service check signal With ignition switch ON (II) and DLC open:
5 V
With ignition switch ON (II) and DLC
connected with HDS: 0 V
E17 BLU/GRN CRS Downshift signal input from
cruise control unit When cruise control is used: About 1 V
E26 BLU/WHT VSS OUT Vehicle speed signal
detected from countershaft
speed sensor, and sent to
speedometer and odometer Depending on vehicle speed: Pulsing signal
03/07/29 09:29:31 61S0X050_140_0045