Honda 2004 Odyssey, Service Manual

Page: 1378 / 2459

０１
０２
Ｓ０Ｘ４Ａ００Ｊ１６１７０９２１４０１ＫＤＡＴ００
Special Tools Required
20-13
Sliding Door Panel Removal/Installation
12 mm
(0.47 in.)
1 mm
(0.04 in.)
45 mm
(1.77 in.)
95 mm (3.74 in.)
C
Fastener Locations
: Clip, 9
45°
D
A B
D
A
B
C
Trim pad remover, Snap-on A177A, or equivalent,
commercially available.
1. For EX and EX-L models: Disable the power sliding
doors by turning off the main switch.
2. Release the clips that hold the front and rear upper
trim (A, B) with a commercially available trim pad
remover (C), release the hooks (D), and remove the
trim. Remove the trim pieces with as little bending
as possible to avoid creasing or breaking them.
3. Remove the inner handle (A) by pulling the clip (B)
out with a wire hook (C).
(cont’d)
03/07/29 10:00:04 61S0X050_200_0015