Honda 2004 Odyssey, Service Manual

Page: 2428 / 2459

−
−
−
−
０７
＊０１
YES
NO
YES
NO
23-363
GAUGE ASSEMBLY CONNECTOR B (22P)
YEL
C851
A
10. Connect a voltmeter between the No. 11 terminal of
gauge assembly connector B (22P) and body
ground. Turn the ignition switch ON (II), and
measure the voltage. There should be battery
voltage.
Faulty SRS indicator circuit in the gauge
assembly or poor contact at gauge assembly
connector B (22P) and the gauge assembly; if the
connection is OK, replace the gauge assembly.
Open in the under-dash fuse/relay box No. 9
(10A) fuse line, or open in the YEL wire of the
dashboard wire harness. If the under-dash fuse/
relay box is OK, replace the faulty harness.
11. Replace the No. 9 (10A) fuse, and check to see if the
SRS indicator comes on.
The system is OK at this time.
Repair the short to ground in the under-dash
fuse/relay box No. 9 (10A) fuse circuit.
12. Turn the ignition switch OFF.
13. Disconnect the SRS floor harness 28P connector (A)
from the SRS main harness connector C851.
(cont’d)
Wire side of female terminals
Is ther e batter y voltage?
Does the SRS indicator come on?
03/07/29 10:42:39 61S0X050_230_0363