Honda 2004 Odyssey, Service Manual

Page: 198 / 2459

＊２７
＊２８
＊２９
＊３０
＊３１
FRONT CAMSHAFT PULLEY:
REAR CAMSHAFT PULLEY:
6-31
B
C
A
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
A
B
10. Install the timing belt guide plate as shown.
11. Install the lower cover (A), front upper cover (B)
and rear upper cover (C).
12. Install the crankshaft pulley (see page 6-18).
13. Rotate the crankshaft pulley about five or six turns
clockwise so the timing belt positions on the
pulleys.
14. Turn the crankshaft pulley so its white mark (A)
lines up with the pointer (B).
15. Check the camshaft pulley marks.
• If the camshaft pulley marks are at TDC, go to
step 16.
• If the camshaft pulley marks are not at TDC,
remove the timing belt and repeat steps 2
through 14.
(cont’d)
03/07/29 09:11:38 61S0X050_060_0031