Honda 2004 Odyssey, Service Manual

Page: 2216 / 2459

−
−
−
−
−
−
＊０２
０２
０３
YES
NO
YES
NO
23-151
BLK BLU/RED
BLK RED/BLU
FRONT PASSENGER’S SEAT BELT
BUCKLE SWITCH 3P CONNECTOR
RIGHT SIDE WIRE HARNESS 3P CONNECTOR
BLK
C
7. Unbuckle the front passenger’s seat belt.
• Check resistance between the No. 1 and No. 2
terminals of the front passenger’s seat belt
buckle switch 3P connector. There should be
0
1 .
• Check resistance between the No. 1 and No. 3
terminals of the same connector. There should
be an open circuit, or at least 1 M
.
Go to step 8.
Replace the front passenger’s seat belt buckle
assembly, and clear the DTC.
8. Check resistance between the No. 1 terminal of the
right side wire harness 3P connector and body
ground. There should be 0
1 .
Go to step 9.
Open in the right side wire harness or poor
ground connection at G581. If G581 is OK, replace
the right side wire harness.
9. Disconnect the negative cable from the battery.
10. Disconnect SRS unit connector C (8P) from the SRS
unit.
(cont’d)
Terminal side of male terminals
Terminal side of male terminals
Wire side of female terminals
Is the r esistance as specif ied?
Is the r esistance as specif ied?
03/07/29 10:36:01 61S0X050_230_0151