Honda 2004 Odyssey, Service Manual

Page: 1514 / 2459

＊０１
Ｓ０Ｘ４Ａ００Ｊ１８５２６２３４６０１ＫＢＡＴ００
０１
Ｓ０Ｘ４Ａ００Ｊ１８５２６２２６９７１ＫＢＡＴ００
Sealant: Cemedine P/N 08712-0004, or equivalent
20-149 20-149
Fenderwell
Inner Fender Replacement Fenderwell Trim Replacement
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
Fastener Locations
: Bolt, 1 A
: Screw, 4 B
: Clip, 6 C : Clip, 3 D
INNER FENDER
FRONT SPLASH GUARD
(For some models)
B
B
B
A
D
FRONT
BUMPER
C
C
C
C
C
B
D
C
D
A
C
A
B
NOTE: Take care not to scratch the body.
1. Remove the inner fender as shown.
2. Install the inner fender in the reverse order of
removal, and note these items:
• Replace any damaged clips.
• Push the clips into place securely.
1. Remove the fenderwell trim (A) by carefully pulling
it out.
NOTE: The steel core (B) in the fenderwell trim
cannot be restored to it original shape once it is
bent. Replace the fenderwell trim when the steel
core is bent.
2. Clean the body bonding surface with a sponge
dampened in alcohol. After cleaning, keep oil,
grease and water from getting on the clean surface.
3. Apply clear sealant (C) into the channel of the
fenderwell trim from end to end.
4. Install the fenderwell trim.
5. Scrape or wipe the excess sealant off with a towel.
To remove sealant from a painted surface, wipe
with a soft shop towel dampened in alcohol.
03/07/29 10:04:05 61S0X050_200_0151