Honda 2004 Odyssey, Service Manual

Page: 2171 / 2459

−
−
−
−
０４
０５
０１
YES
NO
YES
NO
23-106
SRS
DTC Troubleshooting (cont’d)
A
SRS UNIT CONNECTOR A (18P)
SRS UNIT CONNECTOR A (18P)
12. Disconnect SRS unit connector A (18P) from the
SRS unit.
13. Disconnect the special tool from the cable reel 4P
connector.
14. Reconnect the battery negative cable.
15. Turn the ignition switch ON (II).
16. Check for voltage between the No. 7 terminal of
SRS unit connector A (18P) and body ground, the
No. 16 terminal and body ground, the No. 6
terminal and body ground, and the No. 15 terminal
and body ground. There should be 0.5 V or less.
Faulty SRS unit; replace the SRS unit (see
page 23-382).
Go to step 17.
17. Turn the ignition switch OFF.
18. Disconnect the cable reel from the SRS main
harness.
19. Turn the ignition switch ON (II).
20. Check for voltage between the No. 7 terminal of
SRS unit connector A (18P) and body ground, the
No. 16 terminal and body ground, the No. 6
terminal and body ground, and the No. 15 terminal
and body ground. There should be 0.5 V or less.
Replace the cable reel (see page 23-377).
Go to step 21.
Wire side of female terminals
Wire side of female terminals
Is the voltage as specif ied?
Is the voltage as specif ied?
03/07/29 10:34:28 61S0X050_230_0106