Honda 2004 Odyssey, Service Manual

Page: 115 / 2459

０１
０１
＊０１
＊０２
Ｓ０Ｘ４ＡＺ４Ａ１４１０００１２９２５ＭＡＡＴ００
1999-2001 models
23 N·m (2.3 kgf·m, 17 lbf·ft)
4-28
Charging System
Auto-tensioner Inspection
A
A
B
C
A
1. Check the position of the auto-tensioner indicator’s
pointer (A) with the engine not running. Start the
engine, then check the position of the pointer again.
If the position changes, replace the auto-tensioner.
2. Check for abnormal noise from the tensioner pulley.
If you hear abnormal noise, replace the auto-
tensioner pully (see page 4-31).
3. Remove the alternator-compressor belt (see page
4-26).
4. Move the auto-tensioner back and forth within its
limit with the wrench in the direction shown. Check
that the tensioner moves smoothly and without any
abnormal noise. If the tensioner does not move
smoothly or there is abnormal noise, replace the
auto-tensioner.
5. Remove the auto-tensioner (see page 4-29).
6. Clamp the auto-tensioner (A) by using two bolts
(6 mm diameter) (B) and vise (C) as shown. Do not
clamp the auto-tensioner itself.
7. Attach a torque wrench (A) to the pulley bolt.
Measure the torque when the tensioner is turned
counterclockwise. If the torque is less than
specified value, replace the auto tensioner.
03/07/29 09:07:33 61S0X050_040_0028