Honda 2004 Odyssey, Service Manual

Page: 952 / 2459

−
−
−
−
−
−
−
−
＊０１
０１
０２
Ｓ０Ｘ４ＡＡ１Ｋ７７１０００９０７９８ＦＡＡＴ００
＋ −
＋
−
DTC P0798:
YES
NO
YES
NO
YES
NO
14-339
A/T CLUTCH PRESSURE CONTROL
SOLENOID VALVE C CONNECTOR
PCM CONNECTOR B (25P)
LS C (GRN/RED) LS C (RED/BLU)
PCM CONNECTOR B (25P)
LS C (GRN/RED)
LS C (RED/BLU)
Problem in A/T Clutch Pressure
Control Solenoid Valve C Circuit
NOTE:
• Record all freeze data and review General
Troubleshooting Information (see page 14-247)
before you troubleshoot.
• This code is caused by an electrical circuit problem
and cannot be caused by a mechanical problem in the
transmission.
1. Disconnect the 2P connector from A/T clutch
pressure control solenoid valve C.
2. Measure A/T clutch pressure control solenoid
resistance at the solenoid valve connector.
Go to step 3.
Replace A/T clutch pressure control solenoid
valve C (see page 14-363).
3. Disconnect PCM connector B (25P).
4. Check for continuity between PCM connector
terminals B13 and body ground, and between B24
and body ground.
Repair short to ground in the wires between
PCM connector terminals B13 and B24, and A/T
clutch pressure control solenoid valve C.
Go to step 5.
5. Connect the A/T clutch pressure control solenoid
valve C connector.
6. Measure the resistance between PCM connector
terminals B13 and B24.
Go to step 7.
Repair loose terminal or open in the wires
between PCM connector terminals B13 and B24,
and A/T clutch pressure control solenoid valve C.
(cont’d)
Terminal side of male terminals
Wire side of female terminals
Wire side of female terminals
Is the r esistance 3 10 ?
Is ther e continuity?
Is the r esistance 3 10 ?
03/07/29 09:39:10 61S0X050_140_0342